Zhengzhou safes, a brief introduction to the use of electronic safes

Instructions for use of electronic safes

Preparation

1. Open the Zhengzhou safe door using mechanical or electronic emergency methods.

2. Open the battery cover behind the door and insert four 1.5V, AA batteries (alkaline batteries are recommended) according to the positive and negative polarities.

3. After inserting the battery, the display shows "ALLREADY" for 1 second, automatically performs a circuit scan and test, and then enters sleep mode. The display shows the year, month, day, time, and weekday.

4. The safe's factory password is set to "1234". After installing the batteries, you can use the factory password to open the door.

Personal password setting and changing

1. Press the "#" key. When the yellow screen lights up and displays "--------", enter the original factory password or personal activation password, and then press the "#" key to confirm. After hearing two "beep" sounds, "OPEN" will be displayed and the blue screen will light up, indicating that the password is correct.

2. Press the "※" key within seven seconds to enter the password modification state. At the same time, "--------" will be displayed. Enter any 4-8 characters of password, press the "#" key to confirm, and "INTO" will be displayed, indicating that the password has been set or changed successfully.

3. The new personal password has been set and stored. You can use this password to open the door lock directly in the future.

Door opening method

1. Press the "#" key (the yellow light on the display will turn on).

2. Enter the correct 4-8 digit personal password (when entering a 4-7 digit password, you must press the "#" key). After hearing two beeps, the screen will display "OPEN" and the blue screen will light up, indicating that the password is correct. You can then open the Zhengzhou safe door by turning the handle or key. If the password is incorrect, "Error" will be displayed. Note: During password entry, you can press the "※" key to delete incorrect numbers. Each press deletes one entered number.

Clear display

1. Before opening the door, press the "#" key once, then press the "※" key. The display screen will no longer show the entered password and characters, but other functions will work normally. The display function will automatically resume after the door is opened.

Date, clock and weekday settings

1. When the battery is first installed, the year, month, day and time, and weekday are 00-01-01 and 00-00 Monday, respectively.

2. In sleep mode, the "※" key displays the date 00-01-01. After three seconds, it automatically switches to "SLEEP" mode to display the time.

3. When displaying time or date, press the "#" key once to switch between year, month, day or hour, minute, weekday. Select the year, month, day or hour, minute, weekday you wish to change.

4. Use the number keys "0" and "8" to change the flashing year, month, day, hour, minute, and day of the week. Each press of "0" decreases the number by one digit, and each press of "8" increases the number by one digit.

Door opening record query

1. Enter the correct password to open the door. When the "OPEN" displayed on the screen disappears but the backlight is still on, press the "0" key.

2. The display screen shows the last time the door was opened. It will first show the date, then the time, and then show which password was used to open the door. "PASS1" is the personal password for opening the door.

3. If the "PASS1" displayed on the screen has not disappeared, press the "0" key again to display the previous door opening record. This process can be repeated to view the time records of 14 door openings.

Emergency activation

1. When the battery inside the Zhengzhou safe runs out, please use an emergency power supply, enter the correct password, and you can open the safe door.

2. If the electronic circuitry inside the Zhengzhou safe malfunctions or the password is forgotten, the emergency key can be used to open the door.

3. Insert the external power plug into the emergency cover. You will see a mechanical lock keyhole. Insert the emergency key and turn it. Then turn the handle and the key to open the safe door.

Note: Please keep the emergency key in a safe place outside the safe.

Reset button

1. If you forget or lose your password, you can reset it to the factory default password "1234" by pressing the "AV" reset button. Error code alarm.

1. If you enter the wrong password three times in a row, an alarm will sound for 1 minute. Enter the correct password to clear the alarm.

2. Alarm setting when the safe is vibrated.

3. Press the "0" key to display "BELLON" and enter alert mode.

4. The safe will sound an alarm after being vibrated for 1 minute and then automatically stop. After the alarm is deactivated, press the "#" key to enter the correct password, and the screen will display "OPEN" and the blue screen will light up, automatically deactivating the alarm.

Undervoltage indication

1. When the Zhengzhou safe is opened, if the display shows the "battery symbol", it means the battery voltage is normal. If the display shows "battery symbol - LOBATTE", it means the battery voltage is insufficient. Please replace the battery as soon as possible. Before replacing the battery, please press the "#" key for 3 seconds.

Safe fixing method

1. There are two fixed mounting bolts on the back panel of the safe. Use M10 expansion bolts to fix the safe to the wall or a fixed object to ensure security.