One grid tells you how to maintain office partitions on a daily basis.

Office partitions are widely used in modern office environments and are a major guarantee of high-efficiency work. However, if not properly maintained, they will become increasingly dirty, with dust accumulating and poor air circulation, leading to symptoms such as dizziness, chest tightness, and fatigue among employees, thus reducing work efficiency. Therefore, the maintenance of office partitions is very important. So, how do you maintain office partitions ? Here are a few tips from Yige Office Furniture.

1. If there is dust or dirt on the screen, simply wipe it with warm water or soapy water.

2. If the screen surface is stained with oil or other dirt, wipe it clean with a paper towel first, then clean it with a neutral detergent, a special detergent, or an ammonia solution, and finally wipe it clean with water.

3. For fabric screens, regular dusting and maintenance are necessary, at least once a week, especially for the fabric itself. Dusting is generally done with a small vacuum cleaner or by patting and wiping with a cloth.

4. For fabric screens used for the first time, you can spray a little protective agent on the fabric to do some pre-treatment.

5. Fabric screens should not be wiped with a damp cloth, as this can easily damage the fabric threads, even causing spots and shortening their lifespan.

6. After cleaning a fabric screen with detergent, make sure to wipe off any residual detergent, otherwise it will attract dirt more easily. Also, when wiping the screen, you should proceed from the outside in.

7. Office partitions should typically be thoroughly cleaned by a professional cleaning company after one year of use.

8. Avoid impacts to office partitions with hard objects to prevent scratches.

9. Office partitions should not be placed in locations exposed to direct sunlight, otherwise they are prone to fading and peeling, thus aging easily.

10. Do not move or disassemble the screen at will. If necessary, it is best to ask a professional to do it.

11. When wiping office partitions with glass panels, lint is easily left behind. Therefore, try to wipe them clean with a soft, damp cloth, and then wipe them again with old newspapers. This will make the glass panels look brand new.

12. Aluminum alloy office partitions can usually be cleaned by wiping them several times with a dry cloth dampened with a little water. If there is oil stains, do not wash them directly with water; wipe them with a dry cloth or clean them with a cleaning agent.